Home > Flammability Test Chamber >

Glow - Wire U Type IEC 60695-2-10 Nickel Chromium Element

Product Categories

Electrical Appliance Testing Equipment [365]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [134]
Battery Testing Equipment [66]
Switch Life Tester [269]
Led Testing Equipment [70]
Water Ingress Testing Equipment [82]
Environmental Test Chamber [103]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Glow - Wire U Type IEC 60695-2-10 Nickel Chromium Element

Name: Glow Wire U Type IEC 60695210 Nickel Chromium Element
Brand: Sinuo
Price: 1 USD

Best Glow - Wire U Type IEC 60695-2-10 Nickel Chromium Element wholesale

Brand Name : Sinuo

Model Number : SN7714

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Negotiable

Payment Terms : T/T, L/C, Western Union, MoneyGram

Supply Ability : 10 Sets Per Month

Delivery Time : 5 Days

Packaging Details : Carton Box

Material : Nickel / Chomium

Diameter : 4mm±0.07mm (before bending)

Test Standard : IEC 60695-2-10

Hole for Thermocouple : Ф1mm or Ф0.5mm

Contact Now

Glow-wire

Glow-wire U Type Nickel / Chomium Element for Flammability Test Chamber

Product overview:

This glow-wire meets the requirements of IEC 60695-2-10 clause 4.1. The glow-wire is formed from nickel/ chromium (> 77 % Ni/20 ± 1 % Cr) wire, having an overall diameter of 4.00±0.07mm (before bending). The dimensions of the glow wire loop are as detailed in Figure 1.

Technical Parameters:

No.	Item	Parameters
1	Material	nickel/ chromium (> 77 % Ni/20 ± 1 % Cr)
2	Diameter	4.00±0.07mm (before bending)
3	Detailed dimension	Refer to IEC 60529-2-10 Figure 1
4	Hole for thermocouple	Ф1mm (Ф0.5mm can be optional)

How to prepare a new glow-wire?

A new glow wire shall be annealed for a total at least 10 h by being subjected to a current of at least 120A before being sued for a test run. The total annealing time may be achieved cumulatively. To avoid damage, the thermocouple shall not be installed during annealing. At the end of annealing, the depth of the thermocouple pocket hole shall be verified.

The glow-wire in the glow-wire test apparatus

Product Tags:

4mm Flammability Test Chamber Glow Wire

4mm Nickel Chromium Element

Glow - Wire U Type IEC 60695-2-10 Nickel Chromium Element Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!